1 site multiple MX's

[Craig_Howson]

Hi

We have a site which has multiple listed buildings and as such running copper/fibre between or installed p2p is a real headache. 

We are trying to cater for a CCTV system which will include many cameras connected across the site but will be connected back to different MX's.

We are looking at 3 MX's, each with their own broadband circuit and all need to speak locally back to a CCTV recording device NVR. Given they are on different MX's I expect they will need different subnets for routing purposes (unless there is a way around this). 

Can we use mesh VPN somehow to connect them to the same CCTV NVR, even though they are on different MX's?

Is there a better way to achieve this?

[ffiol]

Hello,

If you don't have any other MXs that are HUBs, you can make everything go through that HUB and allow it in the Site-to-site outbound firewall rules.

If it's a new installation, you can make them all HUBs and they will form a mesh between the three.

You also have the option of making one MX the hub and the others spokes, but if you only have three, I would make them all hubs.

Please correct me if you think I'm wrong.

Best regards

[DarrenOC]

Dare I say it…..you could replace the cameras with Meraki ones and boom no more need for the on-prem NVR 😁

Otherwise, just create a hub-spoke auto vpn and route all cctv traffic back to your main site where the nvr resides.

https://documentation.meraki.com/SASE_and_SD-WAN/MX/Design_and_Configure/Configuration_Guides/Site-t....

[AFamilyGuy]

If the networks are not connected then why do you want to use the same address space in the different buildings?

[Craig_Howson]

The full mesh on site does sound good but not sure it would work for us.

Here is a topology of what we have existing (hub and spoke - left) and the new site (right).

All existing sites use AutoVPN to connect back to our central hub for DC connectivity. I still need this for the new site too so I would typically use AutoVPN to connect the back to the central hub. But how would I then get the CCTV cameras across the 3 new buildings to communicate with the NVR in building 1 and still be able to connect them all back central for DC server connectivity?

[AFamilyGuy]

I don't understand, if you have 3 MXs (one for each building) why wouldn't the cameras be able to communicate with the NVR in building 1? What is the CCTV system you have? Does it require layer 2 adjacency between the cameras and the NVR?

Meraki Autovpn supports spoke to spoke communication, which should address your concern (unless I'm not understanding what you are asking 🙂 ).

Thanks!

[Craig_Howson]

I think what you are suggesting is sending all traffic from building 2 (for eg.) back local to central hub and then back out the other spoke in building 1.

We need local communication in case of ISP issues and local recording functionality. 

[PhilipDAth]

Each site will require its own unique subnet range.  You'll enable AutoVPN on the MXs to network all the sites together.