cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

First full-stack Meraki Go installed today - question on port forwarding

SOLVED
Highlighted
Here to help

First full-stack Meraki Go installed today - question on port forwarding

I did my first full stack (Firewall, Switch, WiFi) install today. No real problems, but some of the devices had to be repeatedly rebooted to get them to configure correctly.

 

Now that everything is in and it appears to be working well enough, customer has asked me for a VPN (they didn't ask about that before I did the install!!!)

 

I've got a machine inside of the network configured as a VPN server now, but I can't seem to poke any holes in the firewall.

 

I've got port 1701 UDP forwarded to my VPN machine, but I can't figure out where I'm getting stopped. I don't think it's a problem behind the firewall, because I've got 2 other ports forwarded to different machines, and those don't connect either.

 

I did an NMAP port scan on the network, and there are no open ports.

 

So what do I need to do to actually open the ports?

 

IMG_500B4FB9FD87-1.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
Meraki Go Team Lee
Meraki Go Team

Re: First full-stack Meraki Go installed today - question on port forwarding

Hi Macsolutions,

 

Could you please reach out to support via the app. They'll be able to check whether the port forwarding rules are being applied correctly. 

 

Lee

 

View solution in original post

1 REPLY 1
Meraki Go Team Lee
Meraki Go Team

Re: First full-stack Meraki Go installed today - question on port forwarding

Hi Macsolutions,

 

Could you please reach out to support via the app. They'll be able to check whether the port forwarding rules are being applied correctly. 

 

Lee

 

View solution in original post