Meraki Lab for 500-220 ECMS

Solved
RonJackson
Here to help

Meraki Lab for 500-220 ECMS

Morning, 

Last week I attended the ECMS 2 and found it to be a brilliant course. 
It has encouraged me to go for the 500-220 ECMS exam. 

Im now looking to build out a Lab and have looked at the Lab guide on the Meraki Study portal. However, the equipment they suggest is REALLY expense. Do I need to go with the exact equipment in the study guide or can I use other Meraki equipment? 

Thanks

1 Accepted Solution
Inderdeep
Kind of a big deal
Kind of a big deal

@RonJackson : Try for the free labs on Cisco Cloud

https://dcloud.cisco.com/  

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

View solution in original post

12 Replies 12
Inderdeep
Kind of a big deal
Kind of a big deal

@RonJackson : Try for the free labs on Cisco Cloud

https://dcloud.cisco.com/  

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
RonJackson
Here to help

That's great, I will take a look. Thank you @Inderdeep 
Is this a subscription service? 

Ron

Inderdeep
Kind of a big deal
Kind of a big deal

@RonJackson : These are free labs no subscription required, you just need cisco login credentials. Good Luck  !

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
RonJackson
Here to help

Thats fantastic. Thank you very much! 

KarstenI
Kind of a big deal
Kind of a big deal

I think you need to be a Cisco-partner to schedule slots in dCloud.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
RonJackson
Here to help

Yeah, I think thats the case. I can only access Demo mode and not actually configure anything sadly. Back to the drawing board. 

KarstenI
Kind of a big deal
Kind of a big deal

Then I would suggest:

  • 2*MX (any actual model, AdvSec License)
  • 2* MS with routing capabilities
  • 2* MR (any actual model)
  • 1* MV (any Gen2 model)
  • some SM licenses

Yes, will be expensive just for a lab ...

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Inderdeep
Kind of a big deal
Kind of a big deal

Well if you want dedicated lab for full access, then sure i am with @KarstenI 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
RonJackson
Here to help

Thank you @KarstenI 
Will see what I can do. 

DarrenOC
Kind of a big deal
Kind of a big deal

I think you’re correct @KarstenI.  It’s more for demo purposes

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
MLPillai1465
Here to help

Thanks Inder, I will check out the  fee labs. In my role, I just  use  specific   devices for the project  . so  was thinking about  purchasing kit. But rather expensive with licenses added ontop.

CLR-NetSupport
Conversationalist

@@MLPillai146 I too am studying for the ECMS 1 exam and have looked at the option of building my own lab. I found equipment I could get, but yikes! The licensing is very expensive.  In my role at work I only have view access in our dashboard and not able to actually practice anything in the course. 

We talked about setting up a practice lab or a sandbox with some extra equipment we have, however I think they decided not to due to licensing, etc   I am looking for affordable licensing options currently. 

PFields
Get notified when there are additional replies to this discussion.