Meraki

KarstenI · ‎Sep 2 2021

I assume Sandro is on leave, so I'll jump in with a new question:

On Security & SD-WAN -> Monitor -> Appliance Status -> Uplink you see the following output:

Where can you configure the Connectivity-Destinations (like 103.112.104.41)?
(Select all that apply)

a) Security & SD-WAN -> Configure -> Addressing & VLANs -> Connectivity

b) Security & SD-WAN -> Configure -> SD-WAN & traffic shaping -> Uplink configuration

c) Network-wide -> Configure -> Alerts -> Uplink configuration

d) Organisation -> Configure -> Alerts -> Global Uplink configuration

e) none of the above

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

DarrenOC · ‎Sep 2 2021

I wonder what that could 🐝

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

PhilipDAth · ‎Sep 3 2021

I had to cheat and check an actual dashboard.

Spoiler

B. Security & SD-WAN -> Configure -> SD-WAN & traffic shaping -> Uplink configuration

Meraki

Community

Highly inofficial ECMS Practice Question - 2021-09-01

Highly inofficial ECMS Practice Question - 2021-09-01