ECMS Practice Question - Nov 18th

SOLVED
RafaelM
Meraki Employee
Meraki Employee

ECMS Practice Question - Nov 18th

ECMS Question

 

On the Meraki Dashboard, where should you navigate to make sure your MV cameras are in the correct time zone, and change it if you need to?

 

  1. Cameras > Monitor > General
  2. Cameras > Configure > General
  3. Network-wide > Monitor > General
  4. Network-wide > Configure > General

mv.PNG

 

 

 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
1 ACCEPTED SOLUTION
RafaelM
Meraki Employee
Meraki Employee

The correct answer is 4. Network-wide > Configure > General. That is the only option that is available for all types of networks, including Camera and combined ones as well. Option 2. Camera > Configure > General is not a valid option on combined networks.

 

I hope that helps! 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

View solution in original post

3 REPLIES 3
RaphaelL
Kind of a big deal
Kind of a big deal

Might have 2 answers here ;

 

Spoiler
Cameras > Configure > General    redirects to Network-wide > Configure > General. So 2 and 4 could be correct.

 

cmr
Kind of a big deal
Kind of a big deal

Beware the golf ball

RafaelM
Meraki Employee
Meraki Employee

The correct answer is 4. Network-wide > Configure > General. That is the only option that is available for all types of networks, including Camera and combined ones as well. Option 2. Camera > Configure > General is not a valid option on combined networks.

 

I hope that helps! 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.