ECMS Practice Question - April 23rd

Solved
SandroZ
Meraki Employee
Meraki Employee

ECMS Practice Question - April 23rd

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.

 

See you in a week with the correct answer!

 

ECMS practice question

 

Which of the following MX types of routes has the highest priority?

 

  1. Non-Meraki VPN Peers
  2. Client VPN
  3. AutoVPN Routes
  4. Static Routes

 

P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”.

 

Here you can find previous questions

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
1 Accepted Solution
DavidLowe
Meraki Employee
Meraki Employee

Hey Friends!

 

Lucky Sandro is off on annual leave today, so I will provide the answer. 

 

This week the answer was ...

 

B.) Client VPN

 

 

Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:

 

  1. Directly Connected
  2. Client VPN
  3. Static Routes
  4. AutoVPN Routes
  5. Non-Meraki VPN Peers
  6. BGP learned Routes
  7. NAT*

*If no routes are defined, then the traffic is NATed and sent out an active Internet interface. This only occurs while the MX is configured in Routed mode

 

All information can be found here: https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

View solution in original post

12 Replies 12
AB_LaDigue67
Getting noticed

 

Spoiler
B-elieve its Client VPN then Static Routes then Auto VPN Routes then Non-Meraki VPN  Peers
DarrenOC
Kind of a big deal
Kind of a big deal

B > D > C > A

 

Useful reference doc

 

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Inderdeep
Kind of a big deal
Kind of a big deal

B) Client VPN

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
kYutobi
Kind of a big deal

🐝

Enthusiast
Inderdeep
Kind of a big deal
Kind of a big deal

@kYutobi : only Bee or Bumble Bee 😂

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
kYutobi
Kind of a big deal

@Inderdeep BOTH!!! 😂

Enthusiast
briangallagher
Conversationalist

I'll go with B, D, C then A

 

1. Directly Connected

2. Client VPN

3. Static

4. AutoVPN

5. Non Meraki VPN 

6. BGP

7. NAT

briangallagher
Conversationalist

Lol, just re-read the question and I put the priority  order down 😂😂

defo read the questions carefully in the exam - it can cost you! 

DavidLowe
Meraki Employee
Meraki Employee

Hey Friends!

 

Lucky Sandro is off on annual leave today, so I will provide the answer. 

 

This week the answer was ...

 

B.) Client VPN

 

 

Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:

 

  1. Directly Connected
  2. Client VPN
  3. Static Routes
  4. AutoVPN Routes
  5. Non-Meraki VPN Peers
  6. BGP learned Routes
  7. NAT*

*If no routes are defined, then the traffic is NATed and sent out an active Internet interface. This only occurs while the MX is configured in Routed mode

 

All information can be found here: https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

AB_LaDigue67
Getting noticed

B thankful its B)ank Holiday UK Weekend!!!!!

Inderdeep
Kind of a big deal
Kind of a big deal

@DavidLowe Thanks, we all get that right 🙂 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
AB_LaDigue67
Getting noticed

Maybe only us B rexit Bods

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.