New articles:
Thousand Eyes Integration with Secure Connect
Change: New article.
TLS Protocol and Compliance Standards
Change: New article.
Secure Connect:
Cisco Secure Connect - Cloud Firewall Policy
Change: Added "Meraki Cloud Firewall page is optimized for Secure Connect and should be used for all configurations and maintenance of firewall rules. It is not recommended to use Umbrella Firewall Policy dashboard."
Cisco Secure Connect Foundation Meraki SD-WAN Integration
Change: Added sections "Connect Meraki SD-WAN Branches to Secure Connect Regions", "Select Local Networks Announced to Secure Connect", "Sites Monitoring" and "Using MX Firewall Forwarding Rules with SD-WAN Tunnel".
Remote Access - Secure Client configuration
Change: Added "When the remote users reach the maximum time of the VPN session, the VPN connection will be disconnected with below error message pop up and they will need to re-connect to the VPN for accessing company's resource."
MX:
Change: Added "For routed mode devices, it is currently advised to configure any rules which remap priority such as 'high', 'medium', or 'low', via a rule within the Group Policy section under Network Wide -> Group Policies. Rules configured within the SD-WAN & Traffic shaping page which remaps the priority of traffic is currently deprecated."; added queuing method behavior for firmware MX 18.2 and above to section "Rule Actions".
Content Filtering Powered By Cisco Talos
Change: Updated upstream firewall prerequisite to include TCP port 443.
MX Warm Spare - High-Availability Pair
Change: Added "Adding an online/offline spare MX in the dashboard network will cause a brief connectivity loss on the primary MX due to the initialization of the HA configuration."
Managing and Troubleshooting AnyConnect Certificates
Change: Added note to ensure that Anyconnect clients are connecting using the custom DNS name and not the MX DDNS hostname when using custom certs.
MR:
Change: Added "The CW9166 RJ45 console port is only available when in Cisco DNA management mode."
Configuring RADIUS Authentication with a Sign-On Splash Page
Change: Added "RADSec is not supported for splash authentication."
Automatically Integrating Cisco Umbrella with Meraki Networks
Change: Updated wording regarding licensing "Before May 2022, adding an MR Advanced or MR Upgrade license to a co-term organization would initiate a PDL conversion process; however, this is no longer the case. Conversions from co-term to PDL are no longer supported, as referenced in the Per-Device Licensing article."
Change: Added "This 20 minute period begins when the AP receives the first probe with RSSI of 15 or greater."
SM:
Tags Management Page for Systems Manager
Change: Added "Please note Device Tags are Auto-Tags with device enrollment and have a magic wand icon that cannot be deleted from the dashboard."; added "Deleting Owner Tags" to section "Deleting Tags".
MV:
Gen3 Meraki MV Mounting Options and Guidelines
Change: Added "Dimensional Diagrams" for MV mounts.
Vision Portal Integrations: Access Control
Change: Added descriptions to section "Tour of the Interface".
Meraki Vision Portal Changelog
Change: Added release notes for up to v1.23.2.
Change: Added note "Camera-only admins (view live, view historical, view and export footage) may still be able to see the "Edit Layouts" button on the Video Wall, however, they cannot make changes to the Video Wall."
MT:
MT15 Installation Guide - Indoor Air Quality w/CO2
Change: Added "Dimensions of the mounting plate is 105mm x 105mm."
General Administration:
Using the Organization Inventory
Change: Added "If the device is claimed to the inventory through Device Serial instead of Meraki Order number, the Meraki Order number will not be listed against the device in the Organization > Inventory page."
Cisco Meraki Support Call Recording
Change: Updated call recording duration to 180 days.
Change: Added section "Subscribing to Slack Updates".
Managing Dashboard Administrators and Permissions
Change: Updated click path for combined and non-combined networks "Navigate to Network-wide > Configure > Administration if the network is combined, or Network-wide > Configure > General if the network is not combined."
Change: Added Cloud monitored Access Points to the list of supported devices.
SP-Initiated SAML SSO Configuration Guide
Change: Added "If using the Meraki for Government dashboard, the URL would be https://account.gov-meraki.com/login...login?sso=true."
This is what I'm seeing on my 2 MX68CW running 19.1.4 and 18.211.3 :
Both in combined networks
