Hi Community,
Below are the most important changes to our documentation between May 13th and May 24th:
How to Contact Cisco+ Secure Connect Support
Change: New article.
Change: New articles.
Mobile App - Camera Experience
Change: New article.
MT40 Datasheet - Smart Power Controller
MT40 Installation Guide - Smart Power Controller
Change: New articles.
Cisco+ Secure Connect Data Center List
Change: Made changes to availability of Japan (NRT2), Singapore, Italy and Spain.
Cisco+ Secure Connect - Defining Private Applications
Change: Added section "API Endpoint".
Change: Added additional trainings for MR, MG and MT.
Cloud Monitoring for Catalyst Eligibility and Requirements for Onboarding
Cloud Monitoring for Catalyst Onboarding
Change: Added note that an active DNA Essentials or DNA Advantage license is required for Cloud monitoring.
Manually Integrating Cisco Umbrella with Meraki Networks
Change: Added note to perform manual integration of Cisco Umbrella, before adding the organization to an Enterprise Agreemeent, if desired.
Automatically Integrating Cisco Umbrella with Meraki Networks
Change: Added warning about how Automatic Umbrella Integration will be provisioned for the various License modes available and that this procress is irreversible.
MX and Z-Series Wireless Settings
Change: Added sections for settings and configuration of WiFi 6.
Meraki MX/Z Security and SD-WAN Licensing
Change: Added information regarding the new Secure Teleworker license.
VPN Full-Tunnel Exclusion (Application and IP/URL Based Local Internet Breakout)
Change: Added changes to accommodate for capable Z series devices.
Change: Added Content Filtering to section "Behavior of Management Traffic".
AI-Powered Auto RF: Use AI to Bring Meraki Towards RF Excellence!
Change: Added FAQs.
Change: Added MR28 and CW access points.
Change: Added multiple MR alerts.
High Density Wi-Fi Deployments
Change: Added note that RX-SOP is also supported on 802.11ax access points.
Wireless Throughput Calculations and Limitations
Change: Added Theoretical maximum data transfer rate for MR45.
IPSK Authentication without RADIUS
Change: Added max. iPSK Limit per SSID for MR 30.x.
MS Layer 3 Switching and Routing
Change: Added IPv6 Static Routing and section "Configuring an IPv6 interface".
MV Encoding Improvements: Smart Codec
Change: Added note that Firmware MV4.18.1 does not support Smart Codec, however firmware MV4.18 will.
Pause Processing and Deleting Video
Change: Added note regarding the 24 hour maximum time range for deleting video.
MT10 Datasheet - Temperature and Humidity
MT12 Datasheet - Water Detection
MT14 Datasheet - Indoor Air Quality Monitor
MT20 Datasheet - Open/Close Detection
MT30 Datasheet - Smart Automation Button
Change: Added "Weight (excluding batteries)".
Change: Added information and FAQs for MT40.
Systems Manager Agent Release Notes
Change: Added release notes for v3.7.1.
