New articles:
Cisco Meraki Add-on for Splunk
Change: New article.
Change: New article.
Meraki Hardware and Software Onboarding Guide
Change: New article.
Access Manager - EAP-TLS Client Configuration (Windows, macOS and iOS)
Access Manager - EAP-TTLS Client Configuration (Windows, macOS and iOS)
Change: New articles.
Change: New article.
Access Manager:
Access Manager Certificate Based Authentication - EAP-TLS with Entra ID Lookup
Change: Added section "Troubleshooting"; added required Microsoft Graph API permissions; added "added "Please ensure to upload a full trusted certificate chain by compiling all intermediate and root certificates into a single.cer or.crt file. Begin by exporting each certificate in the chain as a Base64 encoded.cer file. Open each exported file with a text editor and copy the entire contents. Paste them sequentially into a new text file, ensuring there are no extra spaces or lines between the certificates. Save this file with either a .cer or .crt extension to create the complete certificate chain. Please refer to this guide on detailed instructions: Microsoft - Export a trusted client CA certificate chain."
Cloud Monitoring for Catalyst:
Monitoring Catalyst Wireless 9800 Controllers
Change: Added "Cisco Catalyst Wireless LAN Controller can register with your Meraki Dashboard since firmware version IOS XE 17.12.3 or 17.15.1 or later."
MX:
Carrier-Grade NAT and Meraki Auto VPN
Change: Added sections "The Problem" and "Solutions".
Change: Added introduction video.
MS:
Change: Added MS150.
Verifying Voice and Data VLAN tags with LLDP phones
Change: Added "When a device land into Voice VLAN, the dashboard adds a 'Phone' tag next to the CDP/LLDP discovery item."
MR:
Configuring RADIUS Authentication with WPA2-Enterprise
Change: Added "When a RADIUS Server is added to the configuration, it will disconnect current clients connected to the SSID."
Change: Added "On the 6 GHz band, AutoRF can assign channels outside the Preferred Scanning Channels (PSC) group if they are selected in the RF Profile list when using 20 MHz channels."
Change: Updated behavior of AP rogue flagging for APs across different network within the same Dashboard Organization.
SM:
Uninstalling Systems Manager and Removing Managed Devices
Change: Added "The profile can also be removed via the dashboard by navigating to Systems Manager > Device, selecting the device(s) that the management profile should be removed from, select the Mobile Security option, then select Unenroll device to trigger an MDM command be sent to the device to remove the enrollment profile. The profile will be removed the next time the device checks in."
MV:
Change: Added "1/1.8” 8.41MP (3840x2160) progressive CMOS image sensor".
Meraki Vision Portal Changelog
Change: Added release notes for up to v1.24.2.
Change: Added "MT Gateway Support for all MT sensors".
MT:
MT10 Datasheet - Temperature and Humidity
Change: Added "Certifications: UL 2905".
General Administration:
Product Firmware Version Restrictions
Change: Added maximum runnable firmware CS 17.1.4 to MS22, MS42, MS220 and MS320.
Change: Updated client appearance behavior for Meraki devices in the clients list: "For networks that do not use the Unique Client identifier method, Meraki devices in the same combined network will not appear in the Network-Wide > Monitor > Clients list, with the exception of MV devices which has always been considered clients for not playing a role as a network device. Meraki devices in different networks will appear in Network-Wide > Monitor > Clients list. For networks using the Unique client identifier tracking method, Meraki Devices in the same network will be shown in the Network-Wide > Monitor > Clients list."
Change: Added "These licensing SKUs are options within the following two subscriptions: 'Meraki Software Subscription SKU: MERAKI-SUB' and 'Cisco Networking Subscription: CISCO-NETWORK-SUB'".
Change: Added "The Client Privacy feature is only available for organizations hosted in the Europe region of Meraki Cloud."
Next-gen Traffic Analytics - Network-Based Application Recognition (NBAR) Integration
Change: Added section "SD-AVC Integration - Smart Application Updates Delivered via the Cloud".
Change: Updated availability: "Meraki Subscription licensing is available for new and renewing customers globally except in Brazil, India, Russia, Belarus, and China."
Change: Added sections "Concepts", "Meraki-hosted Users" and "Authorizations".
Building a Scalable Meraki Solution
Meraki Cloud Sizing and Scaling Considerations and Best Practices
Change: Updated Maximum Devices Per Organization to 35,000.
In reviewing the Verifying Voice and Data VLAN tags with LLDP phones documentation update, I noticed that the port example shared is for client devices yet it shows the port STP guard as Disabled. Just curious, one would think the depicted image would have the port configured as BPDU guard as per client device port configuration?
