Documentation Digest: June 2nd — June 15th

[CameronMoody]

Hi Community,

Below are the most important changes to our documentation between June 2nd and June 15th:

Meraki Health

Change: Detailed mention of firmware requirements

Meraki Event Log

Change: Updated to include “Bad Gateway” events

Out-of-Band Log Fetching

Change: Updated to include Z and MG series.

Low Power Mode

Change: Updated to state that MR46/46E/56/86 do not support low power mode

Switch Settings

Change: Updated with multicast setting section

Webhooks

Change: Updated to state that non-HTTPS is not supported.

Content Filtering

Change: Restructured order

Troubleshooting a Faulty MX Appliance or Z-Series Teleworker Gateway

Change: Updated to include all Z series

MR Wireless Regulatory Domains  

Change: Re-wrote the “Error while claiming new AP section” with more detailed steps

Trusted Access for Secure Wireless Connectivity

Change: Added note on listing trusted devices per owner

Meraki Go - FAQ

Change: New maximum AP count is 50

Meraki Go - Multi-Admin Access

Change: New article

MX Firewall Settings

Change: Updated to state that currently FQDNs are not supported within the cellular firewall section.

[CameronMoody]

Below are the most important changes to our documentation between June 2nd and June 15th:

Meraki Health

Change: Detailed mention of firmware requirements

Meraki Event Log

Change: Updated to include “Bad Gateway” events

Out-of-Band Log Fetching

Change: Updated to include Z and MG series.

Low Power Mode

Change: Updated to state that MR46/46E/56/86 do not support low power mode

Switch Settings

Change: Updated with multicast setting section

Webhooks

Change: Updated to state that non-HTTPS is not supported.

Content Filtering

Change: Restructured order

Troubleshooting a Faulty MX Appliance or Z-Series Teleworker Gateway

Change: Updated to include all Z series

MR Wireless Regulatory Domains  

Change: Re-wrote the “Error while claiming new AP section” with more detailed steps

Trusted Access for Secure Wireless Connectivity

Change: Added note on listing trusted devices per owner

Meraki Go - FAQ

Change: New maximum AP count is 50

Meraki Go - Multi-Admin Access

Change: New article

MX Firewall Settings

Change: Updated to state that currently FQDNs are not supported within the cellular firewall section.

[CameronMoody]

Below are the most important changes to our documentation between June 2nd and June 15th:

Meraki Health

Change: Detailed mention of firmware requirements

Meraki Event Log

Change: Updated to include “Bad Gateway” events

Out-of-Band Log Fetching

Change: Updated to include Z and MG series.

Low Power Mode

Change: Updated to state that MR46/46E/56/86 do not support low power mode

Switch Settings

Change: Updated with multicast setting section

Webhooks

Change: Updated to state that non-HTTPS is not supported.

Content Filtering

Change: Restructured order

Troubleshooting a Faulty MX Appliance or Z-Series Teleworker Gateway

Change: Updated to include all Z series

MR Wireless Regulatory Domains  

Change: Re-wrote the “Error while claiming new AP section” with more detailed steps

Trusted Access for Secure Wireless Connectivity

Change: Added note on listing trusted devices per owner

Meraki Go - FAQ

Change: New maximum AP count is 50

Meraki Go - Multi-Admin Access

Change: New article

MX Firewall Settings

Change: Updated to state that currently FQDNs are not supported within the cellular firewall section.

[kYutobi]

Thanks @CameronMoody 

[nickydd9]

Is there any way to subscribe to Documentation Digest as a newsletter that is mailed out?

[CarolineS]

Hi @nickydd9 -

At the moment, there's not a way to do this. BUT - I can make it happen. Stay tuned!

Cheers!

[CarolineS]

Hi @nickydd9 -

You can now subscribe to the Documentation Digest! Click on the "Documentation Digest" label at the bottom of the post (or just click this link: https://community.meraki.com/t5/forums/filteredbylabelpage/board-id/general/label-name/documentatio...) to get to the list of Documentation Digests; you can subscribe from there.

(1) Scroll up & click "Documentation Digest"

(2) Click to subscribe

You can manage your preferences for how often you receive the subscription (Immediately, Daily, Weekly) here, under the "Content using a label I subscribe to" option (I apologize for the subscription preferences UI. It... could use some work 😛).

Cheers!