New articles:
MS150 Series Installation Guide
Change: New article.
Secure Connect:
Remote Access - Traffic Steering
Change: Added "When using the Traffic Steering option 'Only send traffic going to these destinations', at least one CIDR address must be configured as a destination."
Cisco Secure Connect - Non-Meraki IPSec Tunnel
Change: Added uplink bandwidth (80 Mbps).
Cloud Monitoring for Catalyst:
Cloud Monitoring for Catalyst Onboarding
Change: Added IOS-XE 17.12.4.
MX:
Change: Added "BGP Multi-hop enabled on BGP neighbor" to section "Prerequisites".
Security and SD-WAN (MX,Z) Features Directory
Change: Promoted MX 19.1.X to Stable Release Candidate.
AnyConnect Authentication Methods
Change: Added "Certificate Store Override".
Change: Added "MA-ANT-LTE-1".
MS:
MS and CS Firmware Features Directory
Small-Form Factor Pluggable (SFP) and Stacking Accessories
Dynamic ARP InspectionMeraki MS Group Policy Access Control Lists
Meraki MS Group Policy Access Control Lists
MS Layer 3 Switching and Routing
MS Switch Access Policies (802.1X)
Change: Added MS150.
Cloud-managed Switching Quick Start
Change: Added section with installation and configuration Guides.
MS350 Overview and Specifications
Change: Added "Network ports on the MS350 switches operate at full-duplex; half-duplex operation is not supported"; added note about Cabling Best Practices for Multi-Gigabit operations.
MS355 Overview and Specifications
Change: Added "Network ports on the MS355 switches operate at full-duplex; half-duplex operation is not supported".
MR:
IPSK with RADIUS Authentication
Change: Added IPSK traffic flow.
SM:
Uninstalling Systems Manager and Removing Managed Devices
Change: Added "Once a device is removed from the Systems Manager > Monitor > Devices page, Systems Manager can no longer manage it. To ensure a smooth transition, please make sure to remove any profile settings and managed apps from the device before taking it off the network."; added "Please note if a device is removed from the device details page of SM without performing the correct uninstall processes first, all management access for that device is removed, and the device will lose its original enrollment. This means any profiles, settings, and apps will remain on the device and the dashboard will not be able to remove them. If the device cannot uninstall MDM locally, to remove the settings the device will need to be fully reset using its manufacturer's instructions. Once it has been wiped it can be re-enrolled and can be managed like any new enrollment."
Apple Automated Device Enrollment (ADE)
Change: Added "Please note, ADE setting profiles are bound to the ADE Server token they are created on, if the ADE token is removed the setting profile will be permanently deleted from the dashboard and will need to be manually recreated."
Apple Volume Purchase Program (VPP)
Change: Added section "To grant VPP Device Assignment Licenses".
Change: Added "Please note, that Dashboard Administrator emails can not be used as Owners as this causes issues with authentication and will not work."
General Administration:
Creating an Offline Certificate Request in Windows Server
Change: Added step 3: "Choose 'Proceed without enrollment policy' unless a predefined certificate template needs to be used" in section "Create an Offline Certificate Request".
Change: Added "By default, Tx Packet capture is activated for all Intelligent Capture actions."; added "Without the 'Intelligent Capture' feature, a single packet capture is currently limited to 100,000 packets."; added "Similar to other products, a single packet capture is limited to 100,000 packets."; added "The current limits of the 'Intelligent Capture' feature, such as duration, file size, and packet count, vary depending on the device and the selected output. These limits can be viewed by hovering over the '(i)' icon next to the 'Duration (secs)' field."
Organization Alerts and Alert Hub
Organization Alerts and Notifications Configuration
Network Alerts and Notifications
Change: Renamed articles for clarification.
Managing Dashboard Administrators and Permissions
Change: Added "The link provided in the email is valid for 24 hours. If it is not used within this time frame, the email will need to be resent. For detailed instructions on how to resend the confirmation email, refer to the "Resending Confirmation Email" section later in this document."
Change: Added "Templates are included with the Advantage Tier; however, their use is restricted to configuring only Essential features."
Change: Added "AI-RRM requires firmware version 30.x or newer and MR-ADV license."
Information for Cisco Meraki for Government users
Change: Added "MG52".
Throughput test to the Cisco Meraki Dashboard
Change: Added "Dashboard throughput test may show slower speeds on the MS product range, compared to other Meraki products in the same network, due to how the MS performs the dashboard throughput test."
Resetting Cisco Meraki Devices to Factory Defaults
Change: Added reference for resetting Catalyst switches to factory default.
