New articles:
Change: New article.
Change: New article.
Access Manager:
Change: Added "In rare cases of temporary system failures with external dependencies like Microsoft Entra ID, user or client attributes may be skipped, and policy evaluation will proceed to the next rule. Write each rule to be self-contained and do not assume that reaching a rule means all previous rules evaluated to false."; added MAB condition for Client Group Access Rules.
Security & SD-WAN:
Change: Added note regarding Microsoft’s announcement to retire the Fs_v2 instance.
Switching:
Change: Added section "IOS XE 17.15.5 Release Highlights and Important references".
Change: Updated key points in "Migrating Layer 3 Switches: Pre-configure L3 switches to reduce reconfiguration after upgrade": "Ensure that an uplink SVI (VLAN interface) exists on the Routing & DHCP page, in the same subnet as your management interface. We recommend moving your management interface into the same VLAN as the switch's default route to the Internet. If the default route to the Internet is via VLAN 10, move the management interface of the switch to VLAN 10."
Change: Added "L2 multicast table live tool is only available on firmware version 18+".
Change: Added "When you change your preferred uplink, the previous uplink is removed from the Allow List. To use it again as a candidate uplink, you must manually re-add it."
Change: Added C9350 to "Device Configuration".
Wireless:
Change: Added section "Color Scheme".
Change: Added "dot11w.enabled must be true".
Cameras:
Change: Added vertical Field of View for MV73M/MV73X: "Vertical: 59.6°-19.9°".
Change: Added section "Replacing Batteries".
Platform Management:
Change: Added "For Government cloud customers in this article you see x.meraki.com that it should be x.gov-meraki.com."; added "End users can login to the Microsoft Entra application portal to access the Meraki dashboard login application. The URL for this portal is https://myapps.microsoft.com."
Change: Added "Access Manager networks" to "Limitations of Organization Splits".
Change: Added "Due to a now resolved issue, encrypted syslog deployed in a Configuration Template prior to March 6, 2026 will not work properly and will not send encrypted or unencrypted syslog. To resolve this, delete and then readd the encrypted syslog server entry in the Configuration Template."
Change: Added CW9171 and CW9174.
Change: Updated prerequisites: "Catalyst Centers with 5,000 total devices managed is supported."
Change: Added "Networks with no devices." to list of restricting conditions.
Change: Added restriction for networks bound to a template: "Assigning the Per Dev SDW+ SKU to a network will give that network access to all of the below SD-WAN features except configuration templates."
Change: Added "An access port is assigned to one specific VLAN and only communicates with that VLAN. If a frame arrives for a different VLAN, the MX filters this traffic at the OS or hardware level depending on the model, so this traffic may not be visible in MX packet captures."
Change: Added "If outbound syslog traffic is blocked with a site-to-site VPN firewall rule that is syslog-enabled, the blocks will be logged for each generated syslog packet, and they will not reach the configured syslog server."
