MX:
Change: Updated phase 2 authentication types to MD5, SHA1 and SHA256 and phase 2 PFS groups to 1, 2, 5 or 14.
Change: Added note that for RADIUS server authentication, the Server IP addresses are sorted in ascending order from lowest IP to highest IP. RADIUS traffic towards the servers are prioritized in the same manner, starting with the lowest IP address first. This behaviour cannot be modified.
Meraki MX ThousandEyes Configuration Guide
Change: Added supported regions; added warning that the Meraki Dashboard Account and ThousandEyes Accounts must belong to the same region.
Change: Updated operating capabilities for all public cloud providers (start/stop machine, configure static IP etc.).
MS:
Change: The option for Mac allow list and Sticky Mac allow list for MS390s is currently under limited release.
MR:
MR Overview and Specifications
Change: Added MR PDF datasheets.
Change: Updated note regarding Dual 5 GHz mode. The operating channels are restricted to UNII-1 and UNII-2 for the first 5 GHz radio and UNII-2e and UNII-3 for the second 5 GHz radio.
MV:
Change: Added note about Flashing Red LED state (insufficient PoE power).
SM:
Enrolling and Supervising iOS Devices using Apple Configurator 2.5 or Later
Change: Updated minimum macOS version to macOS 14 or greater.
General Administration:
Change: Added note that the capture will fail if packet capture is set to be taken on "All Access Points" and the number of access points in the network (both online and offline) is larger than 100.
Change: Added instructions on how to have email alerts forwarded as an SMS to a phone number.
Change: Added FAQ "What permission level do I need to add or modify licenses?".
