Documentation Digest: August 4th - August 18th

Meraki Employee

Documentation Digest: August 4th - August 18th



Hi Community,


Below are the most important changes to our documentation between August 4th and August 18th:


NBAR integration with MS390

Change: New article


Best Practices in Viewing MV Video

Change: Added information on the significance of the green bar 


Wireless Clients Don't Appear on Clients Page

Change: Updated with proper client visibility information


Removing Profiles and Apps from Managed Devices

Change: Updated images and KBs to reflect dashboard UI changes


Custom IPsec policies with Site-to-site VPN  

Change: Updated screenshot for non-meraki VPN peer configuration options



Change: Updated to indicate support for CDP in addition to LLDP


Disabling NBAR

Change: Added section to address case where dashboard includes all Wifi6 APs.


MX and Umbrella SIG IPSec Tunnel

Change: New article


MX Cold Swap - Replacing an Existing MX with a Different MX

Change: Emphasized that DDNS hostname will be different if “Clone and Replace” method is used.


Android Enterprise Deployment Guide

Change: Warning note added to Troubleshooting Device Playstore Account section regarding installation issues related to the Android Restriction and Android Device Owner setting "Disable modifying accounts."


Meraki Per-Device Licensing Overview

Change: Added “Queued” state.


Manual Channel Selection, Transmit Power Adjustment, and Antenna Configuration

Change: Updated screenshots


Meraki System Maintenance Overview and FAQ

Change: New article


Source Based Default Routing

Change: New article


Troubleshooting Non-Meraki Site-to-site VPN Peers

Change: Removed "Verify preshared secrets are the same" from Troubleshooting - Event Log: "no-proposal-chosen received" (Phase 1)


Cameron Moody | Documentation Manager, Cisco Meraki
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.