cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Documentation Digest: August 4th - August 18th

CameronMoody
Meraki Employee

Documentation Digest: August 4th - August 18th

documentationdigest.png

 

Hi Community,

 

Below are the most important changes to our documentation between August 4th and August 18th:

 

NBAR integration with MS390

Change: New article

 

Best Practices in Viewing MV Video

Change: Added information on the significance of the green bar 

 

Wireless Clients Don't Appear on Clients Page

Change: Updated with proper client visibility information

 

Removing Profiles and Apps from Managed Devices

Change: Updated images and KBs to reflect dashboard UI changes

 

Custom IPsec policies with Site-to-site VPN  

Change: Updated screenshot for non-meraki VPN peer configuration options

 

MR LLDP/CDP field

Change: Updated to indicate support for CDP in addition to LLDP

 

Disabling NBAR

Change: Added section to address case where dashboard includes all Wifi6 APs.

 

MX and Umbrella SIG IPSec Tunnel

Change: New article

 

MX Cold Swap - Replacing an Existing MX with a Different MX

Change: Emphasized that DDNS hostname will be different if “Clone and Replace” method is used.

 

Android Enterprise Deployment Guide

Change: Warning note added to Troubleshooting Device Playstore Account section regarding installation issues related to the Android Restriction and Android Device Owner setting "Disable modifying accounts."

 

Meraki Per-Device Licensing Overview

Change: Added “Queued” state.

 

Manual Channel Selection, Transmit Power Adjustment, and Antenna Configuration

Change: Updated screenshots

 

Meraki System Maintenance Overview and FAQ

Change: New article

 

Source Based Default Routing

Change: New article

 

Troubleshooting Non-Meraki Site-to-site VPN Peers

Change: Removed "Verify preshared secrets are the same" from Troubleshooting - Event Log: "no-proposal-chosen received" (Phase 1)

 

Cameron Moody | Documentation Manager, Cisco Meraki
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.