I'm new users for meraki AP .
Solved! Go to solution.
Yes, change it to just have VLAN 200 in the default line. No need for that "demo" line.
Check if your ssid is set to vlan tagging
https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points
yes, I looked at them and tried, but there is a situation like this.
Users connecting to the access point receive ip from the block they should not receive.
because the access point mngmt blocks 51 , 52 , 53.
Other ip fields are ap s on sws they are correct.
Is it my mistake here? I say add vlan and add the vlan I want to migrate. Do I just say default vlan and enter vlan number?
Do your APs also have that tag "demo"?
No instead of connecting to the system I asked if there was a mistake we made on my own demo.
Yes, change it to just have VLAN 200 in the default line. No need for that "demo" line.
thank you for everything