Set a Wlan and Lan in GX 20

[Andres_Software]

Hi 

IT Department in my company bought the Meraki GX 20. My department wants to build a subnet. Therefore. I need to set up an IP for the WAN feature (Company domain  IP: 192.168.0.x)  and  the gateway for my subnet( 192.168.18.1)

I would appreciate a lot any help please

[speakerfritz]

look at the config example here

https://documentation.meraki.com/Go/Meraki_Go_-_Wired_Networks_(VLAN)

[Andres_Software]

Thank you for the answer. I appreciate it a lot But that document shows how to set up a vlan. But what I want is a LAN and WLAN. I do not know how to do it. Please could you help me giving me more details 

regards 

[speakerfritz]

For the 2 conditions you laid out.

a . network of 192.168.0.x

b. A subnet of 192.168.18.1 as the default gateway.

you can try a subnet mask of 255.255.128.0

that will give you a network with a range of 192.168.0.1 thru 192.168.127.245

both of your conditions would be within that range and this would be 1 network.

[Andres_Software · Accepted solution]

Creating vlans and changing vlan Id in each port  , I got it