Insight dashboard showing Cell WAN links. How to remove?

BillCarter
Conversationalist

Insight dashboard showing Cell WAN links. How to remove?

I have several MX's that have the ability for a cellular WAN link, but I do not have them active. When going into the dashboard for WAN health all the MX's that have a cell ability (not turned on) show up as a dead link. So I have a lot of links as "dead". 

I can not effectively look at my dashboard and determine if I have an issue and where with all these WAN "links" that are not actually there. 

Not able to upload a photo of it. 

2 Replies 2
Ryan_Miles
Meraki Employee
Meraki Employee

You can filter the view to only include the WAN 1 & 2 ports

 

(uplink:"WAN 1" OR uplink:"WAN 2")

Ryan / Meraki Solutions Engineer

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
BillCarter
Conversationalist

I do that, but what happens is that people that are not aware look at that report and see a massive amount of "uplinks" that are "dead" because of this flaw. 

I do not want that Cell uplink to even be reported if it isn't live/active. 

Get notified when there are additional replies to this discussion.