Have not started this yet but have a very remote office that requires access to a NAS device over a LAN. They require no access to WAN and need to be prevented from access to WAN as to not touch the limited quota. The NAS device does need access to LAN to perform very small (5-10mb) cloud backups at night.
Thinking of using an MX64 for the job and ideally have:
- Group A (NAS only) - access to LAN + WAN
- Group B (All other devices i.e. Printers + Client Computers) - access to LAN . no access to WAN
How would you go about achieving this on the Meraki unit?