cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Re enroll device that is not communicating with Meraki

New here

Re enroll device that is not communicating with Meraki

Hi all,

 

I have an ipad that is reporting  a push certificate error that says it needs to be un-enrolled and re-enrolled.

The iPad hasn't communicated with Meraki for about 3 months and no GPS. When I go on to Systems Manager on the device, it comes up with the enroll this device. If i try to re-enroll the device, I enter the network code and go through the steps, however I get the error 'New MDM Payload does not match with the old one' because MDM already appears in Device Management, and is configured to be non-removable. Resetting the ipad to factory defaults is also disabled by MDM.

 

If the ipad isn't connecting to Meraki, I am presuming an erase/selective wipe command won't have any affect?

I wondered if someone might have any idea how I can resolve this please - any help would be much appreciated.

Thanks



2 REPLIES 2
Highlighted
Kind of a big deal

Re: Re enroll device that is not communicating with Meraki

I think you are going to need to open a case with support on that one.

Highlighted
Kind of a big deal

Re: Re enroll device that is not communicating with Meraki

This happens when the APN certificate expires or something was corrupted. Is the device enrolled in DEP? If not, it it simple to just remove the profile and Meraki MDM app and re-enroll via m.meraki.com. Support will probably inform you to re-enroll the device.

 

If it is enrolled in DEP it is tricky:

-Take a backup of device A (the iPad that hasn't communicated)

-Restore the backup of device A on another device "device B" enrolled in DEP 

-After restoring, make a buckup of device B

-Restore backup of Device B on Device A

 

Simply taking a backup and restoring that backup on the same iPad is not possible (DEP enrollment will not come down!). While wacky, this is the only patch that works.

Find this helpful? Click the kudos button. Thanks!
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels