Hi ,
There is 2 documents that I would like to get some clarification about :
https://documentation.meraki.com/MR/Access_Control/MR_Meraki_RADIUS_2.0
Section Called Station ID is missing 2 attributes :
AP LAN IP
AP Public IP
![RaphaelL_0-1723650009016.png RaphaelL_0-1723650009016.png](https://community.meraki.com/t5/image/serverpage/image-id/38878iC85679726987ECBD/image-size/medium?v=v2&px=400)
NAS ID
Should reflect the warning present on the dashboard about 802.11r. Some attributes are not available if 802.11r is enabled :
![RaphaelL_1-1723650061042.png RaphaelL_1-1723650061042.png](https://community.meraki.com/t5/image/serverpage/image-id/38879i1CC2C9B38D541734/image-size/medium?v=v2&px=400)
Device IP set as NAS-ID
I'm currently running a MR36 with MR30.7 firmware and I do have the attributes AP LAN IP and AP Public IP .
Unsure if the notice is correct :
With MR31.1 the NAS-ID value can be set as the AP’s Public or LAN IPv4 address.
https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_...
![RaphaelL_2-1723650599485.png RaphaelL_2-1723650599485.png](https://community.meraki.com/t5/image/serverpage/image-id/38880i9AAEF79BC50E49C1/image-size/medium?v=v2&px=400)
I'm not sure this is correct. Taking a packet capture of an auth request with a SSID configured with "My Radius server" shows a Called-Station-ID of : NODE_MAC:SSID and not the BSSID:SSID
Cheers ,