getNetworkEvents - specifying multiple event types

Meraki_Dave
Here to help

getNetworkEvents - specifying multiple event types

Hello - I am having a hard time with getting multiple event types to be returned on the below call.

 

When I do them individually, they work, but when I try passing in an array containing multiple types, the return is only for one of them. 

 

from the API docs:

 

 

- includedEventTypes (array): A list of event types. The returned events will be filtered to only include events with these types.

 

 

 

eventTypes = ['radius_mac_auth', '8021x_eap_failure']

events = m.events.getNetworkEvents(network['id'], productType='switch',
                                           includedEventTypes=eventTypes)

for event in events['events']:
    print(event)

 

 

Thanks! 

6 REPLIES 6
Steinbep
Getting noticed

Are you getting an error?  I just tested and didn't have an issue with your code.

no error - it just does not return both types of events, only one. 

I used 4 types in the array and it returned all 4 for me. 

 

Are you working with only one network or cycling through multiple?

only one network, but I verified the network I am testing has both types of events. I will continue to debug on my end if it appears to be working for you. Thanks for testing it! 

It appears to be working, maybe I was just getting so many of the radius_mac_auth events I was not seeing the eap_failure events. 

 

Thanks again! 

Great!
Get notified when there are additional replies to this discussion.