Webhooks or SNMP? using postman. for a monthly report.

Solved
Solitarius
Conversationalist

Webhooks or SNMP? using postman. for a monthly report.

We just switched over to Meraki, and we're trying out Postman, It seems really robust and good, It has plenty of options. 

Our main goal is to get a monthly history of logs and failover events. 

I see that the Meraki Dashboard is sort of lacking in this way. 

I am looking for some solutions, or fingers to point me in the right direction. 

Thank you in advance. 

1 Accepted Solution

For Webhooks, Check this one 

https://developer.cisco.com/meraki/webhooks/#!introduction/overview 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

View solution in original post

5 Replies 5
Inderdeep
Kind of a big deal
Kind of a big deal

Oh that looks nice!, I've heard about RestAPI, I have to ask you if you've looked into Postman at all, It was recommended on the Cisco Devnet, and they have their own collections for it. 

I've been doing research and found out that, SNMP isn't going to work, it doesn't have that many data points to pull. 

So I'm leaning more towards using the Webhooks. 

For Webhooks, Check this one 

https://developer.cisco.com/meraki/webhooks/#!introduction/overview 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

Thank you!, I couldn't find something like this. 😁

@Solitarius : Best of luck !

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
Get notified when there are additional replies to this discussion.