Network ID changed

Solved
boomi
Getting noticed

Network ID changed

I have a network that was converted, I believe, from MX only to combined. Apparently this changes the network ID. Is this working as intended or a bug? 

 

Why is the network ID not static? I noticed the old network ID still worked, and returned only the MX when I queried it for devices. Does a combined network actually have a 'combined' network ID then individual ones for each device type?

 

 

1 Accepted Solution
Seshu
Meraki Employee
Meraki Employee

Hello @boomi 

 

Combined network has multiple payloads of config stored in it, each payload with its own networkID and the combined network on a whole with another networkID. So, the behavior is expected to change the networkID when converting an MX only network to a Combined one. 

 

Please let me know if you have any questions.

 

Regards,

Seshu

Meraki Team

View solution in original post

2 Replies 2
Seshu
Meraki Employee
Meraki Employee

Hello @boomi 

 

Combined network has multiple payloads of config stored in it, each payload with its own networkID and the combined network on a whole with another networkID. So, the behavior is expected to change the networkID when converting an MX only network to a Combined one. 

 

Please let me know if you have any questions.

 

Regards,

Seshu

Meraki Team

boomi
Getting noticed

Understood, thanks!

Get notified when there are additional replies to this discussion.