How to get device Status ? like UP/Down

[Arul]

hi Team.

I need to get the Particular device's up / down status via API. For testing, I am using the below API  and got the result without any status (Up/Down).

https://api.meraki.com/api/v1/devices/Q2HP-225A-XA5C

lat : 37.4180951010362

lng : -122.098531723022

address :

serial : Q2HP-225A-XA5C

mac : e0:55:3d:d2:4b:4c

lanIp : 192.168.128.206

url : https://n392.meraki.com/Lyoli-switch/n/kjwRabg/manage/nodes/new_list/246656714033996

networkId : L_566327653141843049

tags : {}

name : Basement switch

model : MS220-8P

switchProfileId :

firmware : switch-12-28

floorPlanId :

Kindly help me to get the status (UP/Down)

[Lyga_Pavel1]

Hello @Arul,

You can use many method for realize this purpose (SNMP, alerts, webhook etc.)

But very simple and right method - use SNMP Request.

You can use simple Request SNMPv3 Dashboard Controller for purpose monitoring device status (https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/SNMP_Overview_and_C.... This feature configuration for each Organization (Organization-Settings-SNMP Section). Also in SNMP Section you can search SNMPv3 connection parameters (login, configurable authentication and privacy passwords, port and supported protocols connection) to Meraki Controller for you account and you can download from this page specific MIB for upload to your Monitoring System.

I am currently use this method for monitoring device status for network devices (MX,MR,MS) in own Monitoring System (PRTG).

[NJNetworkGuy100 · Accepted solution]

https://developer.cisco.com/meraki/api-v1/#!get-organization-devices-statuses

Status and LastReportedAt are fields in this API call.  It is in the Organizations section.  

[Arul]

Hi

While using the below API,  i can get only a limited number of devices not all the devices. 

https://developer.cisco.com/meraki/api-v1/#!get-organization-devices-statuses

Can  you help on this,

Regards 

Arul

[NJNetworkGuy100]

Are you adding the parameter total_pages='all' if you are using Python and v1 of the API?

Click on "Templates" on that link you posted and look at the Meraki Python Library example.  

Here is some info on Pages and the API:

Pagination - Meraki-Dashboard-API-v1-Documentation - Document - Cisco DevNet