Data doesn't match Dashboard API Documentation

[VictorTJ]

I'm trying to get data from the dashboard on devices.  The data I'm getting in Python doesn't match the Dashboard API Documentation or in Postman.  Any help would be greatly appreciated.

This is what I'm using and the output I'm getting.

url = "https://api.meraki.com/api/v0/organizations/#################/devices"

payload = {}
headers = {
'Accept': '*/*',
'X-Cisco-Meraki-API-Key': '###################################'
}

{
'address': '',
'configurationUpdatedAt': '2020-03-22T22:30:45Z',
'firmware': 'wired-15-10',
'lat': ,
'lng': ,
'mac': 'e0:cb:bc:24:a3:ef',
'model': 'MX65W',
'name': 'MX65W',
'networkId': 'L_64739244',
'notes': '',
'serial': '####-####-####',
'tags': '',
'url': '',
'wan1Ip': '8.8.8.8',
'wan2Ip': None
}

This is what I'm looking for

{
"name": "USMDHAG-2210-DSA02",
"serial": "XXXX-XXXX-XXXX",
"mac": "34:56:fe:ad:2d:f1",
"networkId": "L_64739",
"model": "MS120-8",
"address": "",
"lat": ,
"lng": ,
"notes": "SAFETY OFFICE",
"tags": "",
"lanIp": "10.132.10.20",
"configurationUpdatedAt": "2020-03-15T01:38:37Z",
"firmware": "switch-11-22",
"url": "https://n150.meraki.com/097"
},

[BrechtSchamp]

If you share your code, I can take a look at it.

Edit out sensitive info of course.

[ww · Accepted solution]

You do have a switch  in the network ? Or only the mx65

[VictorTJ]

Thanks for answer.  I realized that the MX doesn't have the same keys and switches do.  Thanks.