global hardware support

Solved
CiscoGraham
Just browsing

global hardware support

We have a customer who purchased wifi kit in the UK. They transferred the kit to their office in the USA. They'd like to be able to log a support call in the UK but have Cisco ship the replacement hardware to the USA location. Is this possible? Is there an additional support service we need to buy to allow that?

Thanks

 

1 Accepted Solution
Mloraditch
Kind of a big deal
Kind of a big deal

I can't say what they will do as this a pretty niche request and not something I've experienced. Allowing such a thing could cause issues with how they stock and maintain spares in each region.

However adding Meraki Now coverage https://meraki.cisco.com/product-collateral/meraki-now-at-a-glance/?file and ordering it with the current service address of the gear would be a possible solution. 

Might be something to discuss with your account manager. We'll see if anyone else has any experience to impart!

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

7 Replies 7
ConnorL
Meraki Employee All-Star Meraki Employee All-Star
Meraki Employee All-Star

Howdy @CiscoGraham as per my response here: https://community.meraki.com/t5/Dashboard-Administration/RMA/m-p/258942

 

Cisco policy is that RMAs will only be shipped to the same country where it was originally destined, in this case, Italy. This is due to tax & customs issues. Furthermore, with the UK being a Cisco SORT location compared to mainland Europe (where RMAs ship from the Meraki disti), it adds another layer of complexity. 

 

In your case, we can only ship a replacement (should it be needed) to the UK. 

CiscoGraham
Just browsing

thanks

Mloraditch
Kind of a big deal
Kind of a big deal

I can't say what they will do as this a pretty niche request and not something I've experienced. Allowing such a thing could cause issues with how they stock and maintain spares in each region.

However adding Meraki Now coverage https://meraki.cisco.com/product-collateral/meraki-now-at-a-glance/?file and ordering it with the current service address of the gear would be a possible solution. 

Might be something to discuss with your account manager. We'll see if anyone else has any experience to impart!

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
CiscoGraham
Just browsing

Thanks.

Ive checked out that data sheet. So i'll try putting that through ccw and enter the USA service to location. Unfortunately the product SKU's are not listed on the data sheet. Ive tried Googling them, no luck. would you happen to know the product SKU for Meraki Now for an MR36?

Mloraditch
Kind of a big deal
Kind of a big deal

I don't, but if you have access to CCW-R you should be able to just load the serial and then pick the appropriate service level.

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
CiscoGraham
Just browsing

ok thanks again!

PhilipDAth
Kind of a big deal
Kind of a big deal

I bet 99 times out of 100 they'll ship them to any address you specify.

Get notified when there are additional replies to this discussion.