How to add Meraki Dashboard to Prime Infrastructure using SNMP ?

ANarcis
Here to help

How to add Meraki Dashboard to Prime Infrastructure using SNMP ?

When Adding the Dashboard to Prime Infrastructure 3.1.0 via SNMP , do I use the public ip address of Security Appliance or DNS Name ?

1 Reply 1
BrechtSchamp
Kind of a big deal

I noticed that in this guide they query the dashboard via SNMP instead of the devices directly, so then the answer is neither... :

https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Cisco_Prime_Infrastructure_Int...

 

That said, you can indeed also query the devices via SNMP. The access credentials of the two are configured in different locations. More info here:

https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/SNMP_Overview_and_...

 

I'm not sure if PI will allow hostnames to be used. It isn't specified in the docs:

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/administrator/guide/PIAdminB...

 

In any case you would then also be depending on DNS to be functional for your monitoring, this may not be desirable.

Get notified when there are additional replies to this discussion.