Dark mode bugs

[cmr]

I thought I'd start a thread about the various (often minor) dark mode bugs that still need sorting out.  Please feel free to add any you find and hopefully we will get some developers reading this! 

[cmr]

In the Insight / WAN Health page, you can choose what you monitor, but in dark mode it is a bit of a guess:

[spaladug]

@cmr Good news. The fix for this has been pushed out and I have validated it (attached pic).

[cmr]

Thank you @spaladug !!

[cmr]

Whenever the help centre pops up, it is stubbornly in light mode:

[Dunky]

When doing a pcap for a switchport and viewing the output live, its white on white, have to select to be able to read it.

[spaladug]

@Dunky Engineering just pushed out the fix for this today and I've confirmed it is resolved now. Attached pic for reference.

[cmr]

When the dashboard times out the reminder that your session is about to expire is dark, but when you click to continue, you are greeted with this:

[Dunky]

Im not logged in at present but i recall when working with firewall rules if enter a policy object ir IP that has an object, the potential objects that are displayed are virtually unreadable - white on grey i think.

[spaladug]

@Dunky this was resolved on Jan 14th.

[Dunky]

Thanks, I can see that's now resolved 🙂

[JGill]

The banner for templated networks still shows the brown banner. 

[RWelch]

An annoyance remains the lower left corner always showing the website consent banner in white.

[Dunky]

When editing the layout of a VideoWall, the Estimated Bandwidth is unreadable - white on grey:

[spaladug]

@Dunky The fix was pushed out just now and I've confirmed the issue is resolved. Thanks for bringing this to our attention.

[JGill]

As of today the new Organizational Summary screen is white on white.  So unless you highlight the area, you would have no idea there is a header.   Also have a white banner around the major frames.  Assurance pages have the same issues, so looks like they might of broke something today. 

[cmr]

I saw that earlier and thought it must just be some premium white space at the top of the page, I forgot it was supposed to have real value!

[Dunky]

Now fixed

[spaladug]

Thanks for raising this issue @JGill. I raised this with engineering yesterday and it is now fixed.

[cmr]

Thank you @spaladug, any chance the first posted bug can be looked at?

[spaladug · Accepted solution]

@cmr I've brought all the above issues up to engineering soon after you started the thread and its just a matter of prioritizing them. Thanks again for sharing all those.

[RWelch]

Not sure if reported previously, moving a device from a network you can't see what options are presented unless you highlight the areas to see what options are presented.

Organization > Configure > Inventory (then select a device to "move" it).

[Dunky]

The Cases screen in Support Center has now screwed up too - the headings are grey/white on white.

[Dunky]

Now fixed

[Dunky]

Another one.... Under Organization>Alerts

Click Configure Alerts in top right

Select the Alert profiles tab.

Edit an alert and the "Save changes" button at the bottom is grey on black as below:

[spaladug]

Thanks @Dunky for letting us know. I am able to reproduce it and we will look into fixing it.

[Dunky]

Thanks @spaladug 

I wish some of the bigger issues we have would get the same prompt response 🙂

[spaladug]

@Dunky Can you direct message me some of those examples so I can look into how we can improve in the future?

[Dunky]

DM sent

[spaladug]

@Dunky Got good news to share. Engineering pushed out the fix just now. I am able to confirm it is resolved on my side.

[Dunky]

Another one....

Under Organization> Camera and Sensor roles, the heading is unreadable (grey on white) as below:

[spaladug]

Thanks @Dunky for sharing this. I've raised this with engineering.

[spaladug]

@Dunky Good news is that engineering pushed out the fix today and I have confirmed it is resolved now.

[Dunky]

Here's another.

Assigning custom role to a SAML Group (Organization>Administrators, SAML Tab, Create new SAML Group)

[spaladug]

Thanks @Dunky for sharing this. I've raised this with engineering.

[spaladug]

@Dunky Good news is that engineering pushed out the fix today and I have confirmed it is resolved now.

[Dunky]

Found another.

Wireless>Access Points. Click on an AP, click location tab at top, click Photo.

Where there is a photo and you hover over it the box in the top left which says "Remove photo" is unreadable until you hover over it.

[cmr]

[spaladug]

Thanks @Dunk and @cmr for reporting this. I am able to reproduce this and have relayed this to engineering. Will circle back when it is resolved.

[spaladug]

@Dunky @cmr Good news is that engineering pushed out the fix today and I have confirmed it is resolved now.

[cmr]

Thank you 🎉

[JGill]

When reviewing VPN Status you get grey on white metrics.

From a network select Security & SD WAN -> VPN Status Click the "Connectivity" Green Bar for a hub (good info here for those that don't know to click here 🙂

Then mouse over timeline to see the grey on white.

[spaladug]

@JGill Thanks for reporting this. I am able to reproduce this and have relayed this to engineering. Will circle back when it is resolved.