Configuire all connected users on Meraki mesh to same subnet

[Wolverine211]

Hi.

This is probably a basic questrion however when I deployed 2 MR57 AP's that are working together, they are issuing different subnets addresses. Want to have all on the same subnet so users can connect to peripherals such as printers.

The site is all cloud (just Merkai AP's) with no servers or wired ports. 

Any help woudl be appreciated.

Thank you

[ww · Accepted solution]

I guess you are running nat mode, if your router does nat and support a lan subnet with dhcp you can configure the ssid for bridge mode.

Take a look here

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Modes_for_Client_IP_Assignme...

[Wolverine211]

Thanks very much @ww . Worked like a charm.

Cheers!

W.