Inventory of MX devices with Embedded LTE or CradlePoint Failover

Solved
JPScolar
Here to help

Inventory of MX devices with Embedded LTE or CradlePoint Failover

Is there a  simple and quick way to get produce a report to tell me how many  MX devices are using?

 

*  Their embedded LTE module for  Failover.

* An external CradlePoint device on WAN2  for Failover 

 

Thank you. 

Juan-Carlos Perez
1 Accepted Solution

javalins, I'll try that. Thanks for the advice. 

Juan-Carlos Perez

View solution in original post

4 Replies 4
javalins
Meraki Employee
Meraki Employee

Hi @JPScolar

 

Right now the best way to pull that information is via the API, /organizations/{organizationId}/uplinks/statuses.  Assuming that the CP is always WAN 2, you would be able to parse out that information with a simple Python script. Same goes for embedded cellular.

Likewise, if you have a Meraki Insight License, you would be able to see that as well. Either a USB 3G/4G modem or built-in LTE (for MX67C/MX68CW only) will be detected as secondary, cellular. But for CP coming in over ethernet, it will just appear as another broadband link.

 

-jv

javalins, I'll try that. Thanks for the advice. 

Juan-Carlos Perez
jkessal
Meraki Employee
Meraki Employee

For the embedded LTE modem on cellular Meraki devices, here is the synthesis of my searches :

MG21 : Gemalto Wireless Module Cinterion : PLAS9-W (LTE (1, 3, 5, 7, 8, 18, 20, 28))

MG41 : Telit Cinterion : LM960A18 : LTE Cat 18

MG51 : Telit Cinterion : FN980 : LTE Cat 20

MG52 : Telit Cinterion : FN990A40 : SA (and NSA) 5G sub-6 FDD and TDD

Z3C : Gemalto Wireless Module Cinterion PLS8-E (LTE (1, 3, 7, 8, 20))

Z4C : ??? (unfortunately cannot find the exact model)

MX68CW : Gemalto Wireless Module Cinterion PLAS9-W (LTE (1, 3, 5, 7, 8, 18, 20, 28))

MX67C : Gemalto Wireless Module Cinterion PLAS9-W (LTE (1, 3, 5, 7, 8, 18, 20, 28))

 

If someone has the Z4C CAT 12 LTE modem information, it will be highly appreciated 🙂

Telit LN920 for Z4C.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.