Hi @NH_DP, One way around this if the device is currently on and responding to pings on the local LAN would be to temporarily enable the Network-wide > General > 'Remote device status pages (through device's LAN IP)' setting which will allow you to access the management IP of the AP via http://192.168.1.1 (as an example.) More on this topic below: https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page#Controlling_Remote_Access_to_the_Local_Status_Page
... View more