You can use 0 / 0 for unlimited but now you have to do this everytime when you save the page or it will put it back to 100Mbps. ... View more

I have like 57 devices in one network all showing warning "Access point has an ethernet negotiation failure" directly on the Access point page. All are connected with only 100Mbit. Devices with Gbit connections seems ok.   ... View more

When attempting to move access points (e.g., MR20) from one network to another while NBAR is active, and where access points are not supported, the new dashboard displays "There was a problem moving the access points." whereas the old dashboard used to indicate "Cannot add MR20 devices to a network running NBAR. For instructions on how to disable NBAR, please visit here."   ... View more

I discovered that it's still possible to revert to the old view. However, in some organizations, there's a redirection to the new view, while in others, there isn't.   To access the old view for Access Points, simply replace the URL with the following: - manage/access_points -> manage/nodes Alternatively, you can navigate to "network-wide" > "clients" and click on "devices" at the top. It appears that this still uses the old link.     ... View more

you can't search for multiple entries in the table anymore, for example Q2PD-XXXX-XXXX OR Q2PD-YYYY-YYYY OR Q2PD-ZZZZ-ZZZZ ... View more

I dislike the new design, not the design itself, but its functionality. Loading times have worsened significantly, especially when dealing with multiple devices. The sorting feature on the accesspoint/switch overview no longer functions properly; I have to click "sort" and reload the page for it to take effect. Previously, all information were displayed on a single table; now, with 30+ devices, one has to scroll all the way down to be able to scroll left/right and than you have go all the way up again. When opening the network list on the left side, it doesn't retain the position; it resets to the beginning every time. Cursor up and down is still working but it does not scroll down. In the access points table, the connectivity history now only displays one green color, making it impossible to discern if the device was in a mesh state within the last 30 days. This information is only visible on the detailed access point page. In the access point/switch overview with multiple pages, the cursor buttons no longer function, requiring scrolling to the bottom and then back to the top again. I'm certain there are more issues that bother me; these are just a few that came to mind. This was tested with Chrome and Opera. ... View more