I have two Meraki MS350 as a core and some MS250 that I allocated as an Access layer switch. The problem is,   1- I create an L3 interface as a VLAN on the MS350 ( with Name, Subnet, VLAN tag, and IP interface) 2- Connect the clients to the MS250 with a particular VLAN tags 3- Set the IP address on clients under the particular VLAN's IP subnet and set the GW (the IP that I assigned in the L3 interface)   Clients can't ping each other in different VLANs and they can just ping all the L3 interface IPs and the clients in the same VLAN. I think the problem is "Inter-Vlan Routing" which I couldn't find on the Meraki's MS350 switch. Without MX series device, is it possible to run this scenario that I described?    ... View more