Hi DawieKabouter, Thanks for reaching out again and best wishes to you as well! Since we last connected, I was ultimately able to open a collaborative support case between Cisco, Meraki, and DUO to hopefully get to the bottom of this. With that said, I had a call with the Cisco Support team yesterday, as a result of me informing them about the suggested work-around of adding the above-mentioned registry key. Long story short, they concur that trying the above step, as part of our continued troubleshooting, makes sense. I have informed my team to implement this on a case-by-case basis, as the issue occurs. I will definitely report back with an update on how that goes for us. Your prior recommendation (to log in as local admin and run VPN client) has been our go-to move (continued thanks for that!). However, this reg key, providing it works for us, would be much simpler to implement globally. If of any value, I was supplied with link below that provide some details on the change in AnyConnect 4.10.05095 that resulted in the AnyConnect embedded browser defaulting to WebView2 runtime, providing that it's installed. The new registry key above reverts the AnyConnect browser to use the legacy embedded browser control. https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/release/notes/release-notes-anyconnect-4-10.html#Cisco_Reference.dita_41127f2b-432f-4cc8-8978-c12a9f7db890 I hope this works out as it's been many months!!! Again, thank you for your continued feedback and follow up on this and I'll respond back with our findings. Sincerely, Mike
... View more
