Hi - We are also trying to get this to work (exact the same topology)  but not able to get this working with certificate on a WIN10 client. User auth is working well (local auth with  SLDAP AAD). Meraki AP is showing a problem with the internal Radius of the MR:   Client failed 802.1X authentication to the RADIUS server. auth_mode='wpa2-802.1x' radius_proto='ipv4' radius_ip='127.0.0.1' reason='radius_login_failure' radio='1' vap='0' channel='44' rssi='47'   and   Client made an 802.1X authentication request to the RADIUS server, but it did not respond. auth_mode='wpa2-802.1x' radius_proto='ipv4' radius_ip='127.0.0.1' details='conn_refused' reason='radius_timeout' radio='1' vap='0' channel='44' rssi='48'   At this point meraki support is looking in to this problem but for now no sollution yet. We have tested with a MR33 and CW9166I accespoint. MB we are doing some wrong configuration (followed this reference https://documentation.meraki.com/MR/Encryption_and_Authentication/Meraki_Local_Authentication_-_MR_802.1X)   Is it possible that you can share some configuration to check if we have the correct setup.   Thanks in advance - PietK   ... View more