Meraki Community

woltman87 · ‎Sep 12 2023

So that's what I had to do: set the management as 172.16.224.0 /23, and WAP as 172.16.226.0 /23. My understanding was that the MX's IP for the whole inside network (172.16.224.0) and as the gateway for everything should be 172.16.224.1, but it appears that's not the case.

woltman87 · ‎Sep 12 2023

I'm trying to create a separate VLAN for our WAPs to segment them from the management VLAN I setup. With this I plan to subnet the network I created, a /21, to a /23. When I try to save the new WAP VLAN I get the error below: I've even switch the management VLAN from a /21 to a /22, same error. Also set both VLANs to a /21, and then it just says, "Vlan subnets cannot overlap with each other". Is this just not possible to do on an MX/within Meraki? I'm thinking there's some interVLAN routing that needs to happen.

Meraki Community

About woltman87

woltman87

Community Record

Re: Can't create additional subnets on MX105

Can't create additional subnets on MX105