Hey guys   i have few meraki APs connected to meraki switch .  We have 3 separate vlans at the site  (guest,corp,mgmt), i'm trunking all these 3 VLANS towards the AP, mgmt vlan is set as native Meraki APs are able to get the IP from the mgmt subnet (via DHCP), however they are always complaining about "DHCP failure on management VLAN"   i mean why the heck ?   im guessing the AP mgmt traffic should be  untagged, and having the switchport set the native vlan to mgmt vlan should work fine. What am i missing ?   Another strange thing i noticed is that it doesnt give me any info about clients (the loading logo loads continuously), and im not able to change any LAN IP settings (the "pencil" button is not there), so there is no way to change L3 settings of the AP (or check the L2/vlan configuration)   Im really out of ideas, im thinking that there might be some vlan mismatch on the AP for the mgmt traffic.   Is there any way to remediate this, or is it best to just factory reset the APs?   ... View more