Meraki

leorsida · ‎Aug 9 2023

like this: hub network 192.168.0.0/24, meraki ip 192.168.0.1 router inside network 192.168.0.2 (non meraki) non meraki vpn connected on hub network 10.0.0.0/24 spoke network 192.168.1.0/24, meraki ip 192.168.1.1 I would like to add the route 10.0.0.0/24 via 192.168.0.2 on the spoke. Does this setup make sense? How can I implement it?

leorsida · ‎Aug 8 2023

Thanks GreenmMan, I suspected this; my initial idea was to direct the traffic towards the other router and consequently forward it to the hub, but by adding the routes for the VPNs in the spokes, the hub's LAN is not recognized. Do you have any tricks in mind?

leorsida · ‎Aug 8 2023

Thanks ww, > Then you need to setup a vpn to that 3rd party from all your mx's >>I cannot do that, as the VPN is authorized only on the public IP address of the hub. > Then advertise the static route to that vpn device in the autovpn > An example? I have another managed device behind the hub that can handle the routes

leorsida · ‎Aug 8 2023

Hello, I manage three Meraki devices configured with Auto-VPN: one Meraki functions as the main hub, while the other two are configured as spokes connecting to the main hub. Within the main hub, there is an additional non-Meraki VPN configured. How can I share this VPN with the spokes? I believe I should set up a static route from the spokes to the hub for the VPN networks... how can I proceed? thanks in advance Daniele

Meraki

Community

About leorsida

leorsida

Community Record

Badges

Re: How to share NON Meraki VPN with other Spoke

Re: How to share NON Meraki VPN with other Spoke

Re: How to share NON Meraki VPN with other Spoke

How to share NON Meraki VPN with other Spoke