Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Carmicklec
Carmicklec
Here to help
Member since Jul 27, 2023
Jan 18 2024
Community Record
9
Posts
0
Kudos
0
Solutions
Badges
Jan 18 2024
8:00 AM
All my systems are fully updated to the latest OS so, it would be the NIC.
... View more
Jan 17 2024
3:55 PM
Guest WiFI is an enhanced open network. The machine in question CAN connect to the Radius Auth WiFi, a Win 11 laptop CAN connect to this network but this machine and another Win 10 CANNOT. When you try it just states "Can't connect to this network". I have turned off power settings checked for drivers, completely updated the machine, uninstalled/reinstalled Network adapter, and merced all previous profiles from the registry and C:\ProgramData\Microsoft\Wlansvc\Profiles\Interfaces, with no success. I have also tried adding the network through manage known networks but there is no option for OWE as I have seen demonstrated elsewhere, only Open and WEP and this seems to be something between the two not open because it has encryption but not WEP because there is no password needed.
... View more
Oct 30 2023
1:41 PM
It is intereting to look through but it isn't showing me anything other than what I originally posted.
... View more
Oct 30 2023
1:40 PM
Of the two devices that seem to have the issue one is an iPhone the other an android tablet
... View more
Oct 27 2023
12:20 PM
Changed the server timeout from 1 to 2 seconds. Changed the EAPOL key timeout from 500 to 1000 milliseconds Reply to previous comment: The clients are literally surrounded by MR70's and my understanding is they are a fully mesh system so there should be no drops at all. Drop zone is within 100' of 2, possibly 3 AP's I have android devices and Apple devices connecting to the Access points not sure where to run a packet capture from?
... View more
Oct 27 2023
11:51 AM
I have deployed several MR70's, WPA2 Enterprise, radius server. Clients have been connecting but experiencing periods of disconnection. When investigating there seem to be three errors I am coming across. 1 - auth_mode='wpa2-802.1x' radius_proto='ipv4' radius_ip='192.168.101.83' error_code='8' radio='1' vap='0' channel='44' rssi='22' A list of error codes would be great, if one exists. 2 - auth_mode='wpa2-802.1x' vlan_id='150' radius_proto='ipv4' radius_ip='192.168.101.83' reason='eapol_timeout' reassoc='1' roam_ap='0E:7B:D8:EA:66:1A' radio='1' vap='0' channel='44' rssi='19' Went down the 'eapol-timeout' rabbit hole yesterday with no resolution. 3 - Client made an 802.1X authentication request to the RADIUS server, but it did not respond.auth_mode='wpa2-802.1x' vlan_id='150' radius_proto='ipv4' radius_ip='192.168.101.83' reason='radius_timeout' radio='0' vap='0' channel='11' rssi='23' This is the majority of the errors, the info bubble says "The RADIUS server didn't respond to this client's request. Check that the server is configured properly and that the server is reachable." The server is configured properly and is reachable or they would never be able to connect and this is intermittent. Unless I am missing something.
... View more
Jul 27 2023
2:38 PM
This is what I was thinking. To clarify the repeater does not need an entry in the RADIUS? It simply passes the data to the gateway and uses the gateways RADIUS entry to connect the device?
... View more
Jul 27 2023
1:58 PM
Does an MR70 WAP need a RADIUS entry and a DHCP reservation in repeater mode? It will never be directly connected to the domain. Now that I have it installed and functional it doesn't seem to need either of these like the ones that are directly connected.
... View more
© 2024 Cisco Systems, Inc.
