Meraki

JCA1 · ‎Jul 25 2023

Thank you!

JCA1 · ‎Jul 25 2023

No, it wasn't the first power on. It was just that the traffic stopped hitting the meraki, dhcp problems, the core switch froze.

JCA1 · ‎Jul 25 2023

Well, they only have one ISP with one fiber handoff so they need a breakout switch, that breakout switch splits the internet connection. What do I need to change here to make it right? Keep the breakout switch but from the MX Lan ports go to a downstream LAN switch instead of going back to the breakout switch? ISP | ___WAN SWITCH___ | | MX1 MX2 | LAN SW

JCA1 · ‎Jul 24 2023

Thanks. How would you be able to bypass the firewall with the wan/core switch?

JCA1 · ‎Jul 24 2023

Thank you! I was under the impression that as long as the native vlan is not on the "allow" list, it will be dropped.

JCA1 · ‎Jul 24 2023

Hi, I'd like to have some feedback to determine if this configuration is supported. We tried to implement this and had to rollback because we started seeing all kinds of problems in the network, dhcp, no intervlan traffic, etc. Any help would be appreciated. The breakout switch is an HP 3800, no svi in the switch. The fws are MX85. This is a single ISP link. We used the virtual ip option for the mx uplink.

Meraki

Community

About JCA1

JCA1

Community Record

Badges

Re: MX85 HA Warm Spare Config design

Re: MX85 HA Warm Spare Config design

Re: MX85 HA Warm Spare Config design

Re: MX85 HA Warm Spare Config design

Re: MX85 HA Warm Spare Config design

MX85 HA Warm Spare Config design

Re: MX85 HA Warm Spare Config design