Meraki Community

AlexM2 · ‎Jul 12 2023

Hi Crocker, I do see that there was planned maintenance on n426 earlier today around the time you posted which may have resulted in a brief outage. Is all resolved now? Best, Alex

AlexM2 · ‎Jul 12 2023

Hi Elise, In order to enable the wireless settings for the MX you can navigate to Security & SD-WAN/Teleworker Gateway > Configure > Wireless settings and toggle the SSID status to Enabled. I'm attaching the article from our knowledge base over our MX and Z series wireless settings below for more detailed instructions: https://documentation.meraki.com/MX/Wireless/MX_and_Z-Series_Wireless_Settings Best, Alex

AlexM2 · ‎Jul 11 2023

Hi! Meraki switches have the ability to have ACLs configured on them through the dashboard. Here is some more information on configuring ACLs from our knowledge base https://documentation.meraki.com/MS/Layer_3_Switching/Configuring_ACLs https://documentation.meraki.com/MS/Other_Topics/Switch_ACL_Operation

AlexM2 · ‎Jul 6 2023

Hi Josua, All of our information over API can be located at the following link below: https://developer.cisco.com/meraki/api-v1/ As of right now, it does not look like there is an established way to pull the information you are requesting via API. I suggest submitting a feature request via the dashboard. The give your feedback button can be located at the bottom right hand side of dashboard. Best, Alex M

Meraki Community

About AlexM2

AlexM2

Community Record

Badges

Re: Server Errors in Dashboard - N426 - Anyone Else?

Re: How to troubleshoot MX67W/MX68W to confirm Wifi is enabled

Re: MS425 ACL Creation Help

Re: SFP Modules information from switches via API

Re: Server Errors in Dashboard - N426 - Anyone Else?

Re: How to troubleshoot MX67W/MX68W to confirm Wifi is enabled

Re: How to troubleshoot MX67W/MX68W to confirm Wifi is enabled