Meraki

Community

About Mangocis

Re: Use virtual Uplink IPs or Use MX uplink IPs

by in Security & SD-WAN
‎May 3 2023 1:55 AM
‎May 3 2023 1:55 AM
I asked Meraki support, and this is their response:     Thank you for contacting Cisco Meraki support. Yes, having 2 WAN uplinks on Primary and Spare MX is supported. Please refer to the following KB for recommended topologies: https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair#Recommended_Topologies ... View more

Re: Use virtual Uplink IPs or Use MX uplink IPs

by in Security & SD-WAN
‎May 2 2023 11:29 PM
‎May 2 2023 11:29 PM
Also this is the Meraki recommendation design for best practice HA. https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair     ... View more

Re: Use virtual Uplink IPs or Use MX uplink IPs

by in Security & SD-WAN
‎May 2 2023 11:24 PM
‎May 2 2023 11:24 PM
Thanks for your response. The idea behind having one IP address from each ISP is to have the same IP address when we experience a failure in the primary MX. Some services rely on the IP address, and we don't want to lose clients' access to those services due to a failure in the primary MX. ... View more

Use virtual Uplink IPs or Use MX uplink IPs

by in Security & SD-WAN
‎May 2 2023 4:47 AM
‎May 2 2023 4:47 AM
Hi,   We have two MXs of the same model, and we want to design an HA for our environment. I am considering having WAN 1 (from ISP 1) on both the main and spare MX, and WAN 2 (from ISP 2) on both the main and spare MX.   ISP1-> (MXA_Wan1, MXB_Wan1) ISP2-> (MXA_Wan2, MXB_Wan2)     The MX also has a virtual uplink setting. Which option is the best? Does anyone have any ideas?" ... View more

Re: Cant access my local VMs when Connecting to Cisco AnyConnect full VPN

by in Security & SD-WAN
‎Apr 17 2023 2:45 AM
‎Apr 17 2023 2:45 AM
Thanks, all! I was able to fix the issue by adding 0.0.0.0/32 to the Client routing and enabling the 'Allow local (LAN) access when using VPN' option in the XML profile.     ... View more

Cant access my local VMs when Connecting to Cisco AnyConnect full VPN

by in Security & SD-WAN
‎Apr 16 2023 11:50 AM
‎Apr 16 2023 11:50 AM
We are using Cisco Secure Client full tunnel for our users, and it works fine. However, we have some developers who are experiencing issues when trying to connect to their VMs in their local VMware environment. When Anyconnect is connected, and I try to add routes manually on the PC, the routes never get added. Do you have any ideas or suggestions regarding this issue? ... View more
Labels:
© 2024 Cisco Systems, Inc.