Community Record
7
Posts
1
Kudos
0
Solutions
Badges
Oct 24 2024
8:23 AM
1 Kudo
Never mind, I was incorrect on the Process ID information. Please disregard.
... View more
Oct 24 2024
7:43 AM
The thing is, we are trying to troubleshoot why the MS390 cannot seem to reach our Cisco 4400 series WAN router via OSPF, and why the router doesn't see any of the advertised routed from the MS390. All settings appear to be correct, but some documentation on the Cisco indicates that the process ID needs to be the same on all the OSPF devices for this to work. If Meraki doesn't use that, how can we ensure it works.
... View more
Oct 24 2024
6:35 AM
I have a question about how Meraki implements OSPF. OSPF on other Cisco devices requires the routers and L3 core switch to have the same process ID to communicate. I don't see this information anywhere in the Meraki device. Where can I find or confirm this information?
... View more
Labels:
- Labels:
-
Layer 3
Aug 26 2024
11:07 AM
If you say so. All I know is that I have the option to configure a DHCP relay on a Network that only has MS120 & MS125 switches in it. If it can't do that, I am curious as to why the option is there.
... View more
Aug 26 2024
6:01 AM
I don’t understand. You can configure DHCP forwarding on MS125 switches. The option is there under DHCP and Routing. All I am asking is can I set the same IP to be the sender IP in the DHCP forwarder on all the switches, instead of using a different IP for each. This article specifically mentions setting up a DHCP relay on MX/MS switches: https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Configuring_DHCP_Services_on_the_MX_and_MS so I know it is a feature. I am just trying to fins out does the helper for each VLAN need to be a unique IP address, or can I just use the same IP for a specific VLAN on all the switches where helpers are configured.
... View more
Aug 22 2024
7:15 AM
When setting up DHCP forwarders, does each switch need its own IP per VLAN as the "forwarding" IP to that DHCP server, or can you set up the "From" IP per VLAN on one switch, then re-use the same IPs for the other switch's forwarders?
... View more
Labels:
- Labels:
-
Layer 2
Apr 10 2024
1:32 PM
Hello. We have 2 new locations where we are establishing small networks, that will have a site-to-site VPN tunnel between them. In each location, the networks are small, so they are flat. There will be 2 MS125s in each location. Do we need an entry in the routing to relay DHCP requests to the DNCP servers in their respective location when the network is flat? My gut says no, I am just looking to confirm.
... View more
Labels:
- Labels:
-
Other
