Meraki

PickNetAdmin · ‎May 18 2023

My mistake... here's the current config for that SSID

PickNetAdmin · ‎May 18 2023

UPDATE: Other SSIDs (pointing to different VLANs) that are assigned to the APs work with no issues. I created a test SSID pointing to the same VLAN as the problem SSID, no issues there either. I'm thinking it may be something with that specific SSID.

PickNetAdmin · ‎May 17 2023

Is there anything specific to look for? The same SSID is on every other AP in the building which have no issues. Would there be a setting somewhere that conflicts with the MR57?

PickNetAdmin · ‎May 17 2023

I have an MR57 AP connected to our Catalyst 9200L. When staff is using their MacBooks, they stay connected for about 2 minutes, then the connection is dropped. Once it's dropped, it does not connect to ANY other APs until it is manually selected in the WiFi menu. We have MR42 and MR52 APs connected to that same switch and they are not having this issue. LLDP is enabled and power delivery is no issue, so I'm at a loss. Any suggestions? UPDATE: My iPhone has stayed connected to the AP the entire test and so on (confirmed via my.meraki.com) I'm unsure about any other devices outside of those two.

PickNetAdmin · ‎Mar 15 2023

Hi! We have a couple of the MR57 APs that we're testing in our environment. When plugged into 3560-X or 3650 PoE+ switches, it operates at 30W normally, no issues. When plugging into 9200L switches (the model we primarily use for APs), it runs in low-power mode and constantly reboots. Even with no other devices plugged in and 2 PSUs installed, it won't use more than 15.4W. I've tried allocating 30W to the port specifically, but still no luck. Has anyone else had this issue?

Meraki

Community

About PickNetAdmin

PickNetAdmin

Community Record

Badges

Re: MR57 dropping connection after 2 minutes

Re: MR57 dropping connection after 2 minutes

Re: MR57 dropping connection after 2 minutes

MR57 dropping connection after 2 minutes

Low Power on MR57 when using Catalyst 9200L-24P