Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About drswimmer
Community Record
6
Posts
2
Kudos
0
Solutions
Badges
Mar 6 2023
8:10 AM
Seems to be working now. Not what I would have liked, but it's working. Also going to be removing all the vlans from the MX and creating the transit vlan between the MX and MS from reading the documentation. Thanks.
... View more
Mar 3 2023
8:11 AM
The 425 is supposed to be the L3 gateway, but honestly some of the existing settings are carry over from the former MX100 and a Dell layer L3 that I didn't want to stir the pot too much. And it sounds like you did indeed find my case. The VLAN in question is 2.
... View more
Mar 2 2023
11:53 AM
2 Kudos
One of the things the Meraki engineer had me do is jump all of my switches from 14.x to 15.20. Still experiencing issue.
... View more
Mar 2 2023
10:45 AM
I called them, sat on the phone for two hours while the engineer assigned to my case literally said "huh, that is weird". Gave me a couple things to try, which I have. Hence, I'd try here before calling again to see if I get a better engineer or something.
... View more
Mar 2 2023
8:53 AM
Hello, I am looking for some guidance on configuration. The scenario is as follows: I have one MX95 acting as our firewall, one MS425 acting as our layer 3 and a series of MS225's acting as layer 2 devices spread around our campus. The MS225's were practically given to me from Cisco due to production issues with my original purchase of MS125's. My issue here is I have some non Meraki AP's that aren't carrying over the DHCP on a open wifi vlan. The MS425 is the DHCP server for this VLAN. The other VLANs that are also on these non Meraki AP's are working as intended. Yes the ports are trunked for these specific VLANs. On the port the ap is connected to all the way to the layer3. When I assign myself a manual address on this public vlan while connected to the ap with the guest network, I am able to browse and etc. Packet captures are seeing my client device request dhcp, dhcp saying hey to my device... Then nothing. I'm not sure if I need some sort of IP helper or relay or something on the MS225's. If so, I'm not really sure how i go about doing that. Any help would be greatly appreciated. Thanks.
... View more
© 2024 Cisco Systems, Inc.
