Can you get all destination IP address of webex servers, and tag them with EF? ... View more

PERHAPS local DNS deployment? ... View more

If you haven't been able to achieve it,  please open a case with us.   ... View more

https://documentation.meraki.com/?title=MX/Other_Topics/IPv6_Support_on_MX_Security_%26_SD-WAN_Platforms_%255BCore_Fundamentals%255D#Overview   Unfortunately, the IPv6 for High-availability (HA) is not supported at this time. ... View more

I "google translate" your question:  Good morning, I want to search for a visited web page to know how many users have visited it   You can go to the Network Client page, there is pie chart, you can see details of the data flows     ... View more

Actually no, I would suggest you to open a case with us first, once it was assigned, we can run some commands to check / capture in realtime.   Be aware of some known issues-- if your MX use WAN2 or cellular as only uplink , you will get the banner saying your MX has trouble communicate with new IP range, but probably not at all, to confim it, just open case with us please ... View more

open a case with support, they will, at last, disable it, if you insist , however it will take 2 days to process ... View more

Here is the procedure https://documentation.meraki.com/General_Administration/Support/Contacting_Support ... View more

I believe a live capture is needed, sounds still most likely like a traffic shaping or firewall setting issue - please kindly open a case with us and give us a call - we can run backend commands to see whether the flow generated by PC was hitting any firewall rules ... View more

When you receive such info, I believe you can "download firewall test failures" , in which you will see which device has trouble to communicate to the new dashboard IP addresses;   To further confirm, just open a case with us, we can run backend commands to check whether it is really had trouble, same time, a real time capture can be taken to confirm which interface did the MX send mgmt traffic ... View more