I'm having an issue with VPN client connection that use AnyConnect software. Every couple of days, new connections are rejected when put user/password and only recharges the authentication pop-up. It's a Meraki MX100 with firmware 17.10.2 with 2 WAN connections; WAN2 it's for VPN with public IP (and also it's the main output) and WAN1 it's with DHCP from the carrier.    I discover the workaround that if I change Main Output to WAN1 and after a couple of minutes I rollback to WAN2, connections are accepted again. TAC it's already checking this, but has half month in this issue and the operation it's getting affected.   Are anyone with a similar issue?     ... View more