WAN1 is primary, LB is disabled.  I want all traffic going out WAN1 unless it's destination is  10.64.2.xxx, a single, no-changing IP destination.   My rule look s like this   Protocol     Source    Src Port     Destination            DST Port      Preferred Uplink Any               Any          Any         10.64.2.xxx/32       Any                 WAN2   A tracert shows routing through WAN1.  In addition, the destination will only accept traffic for my WAN2 IP.  And my attempt to connect to the destination fails.  I can assign the Static IP of the WAN2 connection to a laptop and the connect works.     ... View more