Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Blake-Larkan
Blake-Larkan
Comes here often
Member since Oct 10, 2022
Aug 1 2024
Community Record
4
Posts
0
Kudos
0
Solutions
Jul 30 2024
3:53 AM
Thanks for this! I'll try this out and revert my findings
... View more
Jun 10 2024
12:56 AM
There is nothing in the logs pertaining to the ports where the AP's were connected to it. The switch was powered on, with all the uplinks connected prior. Ports 13 and 15 have AIR-AP3802I-E-K9 and AIR-AP2802I-E-K9 connected and working. Ports 14 and 16 were where the 2 previous AP's that didn't come online were connected. I did not run a cable test during that time because they were up and working before I performed the cut over. I'll need to get back to you once I can try test this.
... View more
Jun 10 2024
12:35 AM
HI, unfortunately the switch does not show the port as orange indicating that there is at least a device connected to the port. It will briefly show the POE lightening symbol within the port but the port will still show nothing is connected to the port. On the same switch there AIR-AP3802I-E-K9 and AIR-AP2802I-E-K9 connected. Port 13 and Port 15 are the connected and working AP's. Port 14 and Port 15 are where the other AIR-AP3802I-E-K9 & CAP2702E-E-K9 were connected to but did not power on from the port.
... View more
Jun 7 2024
8:07 AM
Performed a cut over from catalyst switches to Meraki MS355. The catalyst switches had cisco AIR AP's connected which would be moved over to the MS355. Some of the AP's boot up when connected to the MS355 but every now and then some don't. Moved the uplinks from the AP's between uPOE and uPOE+ with no joy. Moved the uplinks from the AP's to a spare catalyst switch and they return online without any issues, although I do notice the ports auto neg to 100 instead of 1000, which does hit at a possible cable issue. For a brief moment I can see the error on the switch stating "denied power". Currently, there is no way to manually set static power levels on the port level. Is there any known issues or any experience similar occurrences?
... View more
© 2024 Cisco Systems, Inc.
